WORLDWIDE SHIPPING »
Track Your Parcel Here
JOIN OUR MAILING LIST »
For special offers and updates
LOYALTY POINTS »Discount on future orders
How To Articles»
Sheet of O scale Decorative Iron Railings - laser-cut into 0.026" RC Board.
Style #3 - vertical posts with a horizontal top cap, horizontal mid rail, and decorative circular details.
Sheet includes variety of lengths for all your porch or patio railing needs.
> Three (3) long sections totaling 60 scale feet in length.
> Six (6) short sections 22 scale inches in length for each section.
> Six (6) short sections 33 scale inches in length for each section.
> Six (6) short sections 43 scale inches in length for each section.
0.026" carrier card is approximately 5.5" x 8.0".
To prepare for your model:
HANDLE CAREFULLY - as these pieces are quite fragile. Work under magnification.
> Carefully cut pieces from carrier card using a single-edge razor blade
> Cut railing sections to length as needed with single-edge razor blade.
> Drill small 0.025" holes with a pin vice for each railing leg - use the railing pieces as a guide to locate holes. Test fit pieces.
> Paint railing sections with a primer spray paint of desired color (ie, flat black).
> Paint porch or patio to desired color; when dry, re-open the drilled holes.
> Apply small dot of A/C super glue to bottom of each leg, and carefully place to holes.
> Adjust to desired height, and support in vertical position until A/C sets up.
Example assembly below (sample model below is from HO Scale item RSM-D2053a/b):