Sheet of 4 1:120 scale 6' high Security Fence 38' long sections with random width boards with occasional faults such as rotten bottom edges, knotholes and even a busted out spot here or there. Each 36 foot section is different so you can have a nice long run without repartition. These fences are made from our 1/64" birch plywood which is a scale 2" thick.
Fencing is cut from 1/64" thick birch plywood. It is recommended that you put a scale 2x4 along the back side behind each of the joining segments near the top and bottom for lateral support.
NOTE: This scale is normally used for Museum dioramas but is also good for perspective compression in HO scale. Placing items of this scale towards the back of the layout tends to give the impression of depth that might not be there.
