Sheet of HO scale 2"x6" Plank Coral Fencing.
Sheet includes variety of lengths for all your fencing needs. > Two (2) long sections at 30.3 scale feet in length. > Two (2) short sections each at 18.3 scale feet in length. > Two (2) short sections each at 12.3 scale feet. > One (1) double swing door at 12 scale feet opening. > Two (2) single swing doors at 6 scale feet opening.
Fencing represents 6' high coral fencing, but may be trimmed shorter for lower height. Laser-etched with wood grain details such as knot holes and cracks.
Sheet is approximately 6-1/8" x 6.0", and cut into 0.022" RC Board.
To prepare for your model: HANDLE CAREFULLY - as these pieces are quite fragile. Work under magnification.
> Carefully cut pieces from carrier card using a single-edge razor blade > Cut fencing sections to length as needed with single-edge razor blade. > Drill small 0.022" holes with a pin vice for each railing leg - use the railing pieces as a guide to locate holes. Test fit pieces. > Paint fencing sections with a primer spray paint of desired color. > Apply small dot of A/C super glue or tacky glue to bottom of each leg, and carefully place to holes. > Adjust to desired height, and support in vertical position until A/C sets up.
