Sheet of HO scale Decorative Iron Railings - laser-cut into 0.022" RC Board.
Style #4 - decorative horizontal and vertical panels.
Sheet includes lengths of horizontal and vertical decorative panels for your porch or patio details. Each measures ~1.4" in length; vertical panels at 18" in scale wide, and horizontal panels at 24" in scale height.
0.022" carrier card is approximately 3.7" x 3.0".
To prepare for your model:
HANDLE CAREFULLY - as these pieces are quite fragile. Work under magnification.
> Carefully cut pieces from carrier card using a single-edge razor blade
> Cut railing sections to length as needed with single-edge razor blade.
> Drill small 0.020" holes with a pin vice for each railing leg - use the railing pieces as a guide to locate holes. Test fit pieces.
> Paint railing sections with a primer spray paint of desired color (ie, flat black).
> Paint porch or patio to desired color; when dry, re-open the drilled holes.
> Apply small dot of A/C super glue to bottom of each leg, and carefully place to holes.
> Adjust to desired height, and support in vertical position until A/C sets up.
Example assembly below (sample model below is from HO Scale item RSM-D2053a/b):
