Sheet of HO scale Decorative Railings - laser-cut into 0.022" RC Board.
Style #6b - wooden vertical planks with a horizontal top cap - angular sections for a staircase section at 8" tread by 8" riser.
Sheet includes variety of lengths for all your porch or patio staircase railing needs. > Two (2) long sections at 10 scale feet in length for each section. > Four (4) short sections 24 scale inches in length for each section. > Four (4) short sections 35 scale inches in length for each section. > Four (4) short sections 52 scale inches in length for each section.
0.022" carrier card is approximately 4.0" x 3.5".
To prepare for your model: HANDLE CAREFULLY - as these pieces are quite fragile. Work under magnification.
> Carefully cut pieces from carrier card using a single-edge razor blade > Cut railing sections to length as needed with single-edge razor blade. > Drill small 0.020" holes with a pin vice for each railing leg - use the railing pieces as a guide to locate holes. Test fit pieces. > Paint railing sections with a primer spray paint of desired color (ie, flat black). > Paint porch or patio to desired color; when dry, re-open the drilled holes. > Apply small dot of A/C super glue to bottom of each leg, and carefully place to holes. > Adjust to desired height, and support in vertical position until A/C sets up.
