Not logged in
0 Product(s) in cart |
Total $0.00 |
Secure Credit Card Payments

Product Directory


Rail Scale Models Product Details

Product ID RSM-D2310

S Scale Coral Fencing ~ 2in Pipe Rails

Price: $8.95

Sheet of S scale 2" Pipe Rail Coral Fencing.

Sheet includes variety of lengths for all your fencing needs.
> One (1) long section at 30.3 scale feet in length.
> Two (2) short sections each at 18.3 scale feet in length.
> Two (2) short sections each at 12.3 scale feet.
> One (1) large swing door at 12 scale feet opening.
> Two (2) small swing doors at 6 scale feet opening.

Fencing represents 6' high coral fencing, but may be trimmed shorter for lower height. 

Sheet is approximately 6-1/8" x 6-3/8".  Available in the 0.026" RC Board.

To prepare for your model:
HANDLE CAREFULLY - as these pieces are quite fragile. Work under magnification.

> Carefully cut pieces from carrier card using a single-edge razor blade 
> Cut fencing sections to length as needed with single-edge razor blade.
> Drill small 0.025" holes with a pin vice for each railing leg - use the railing pieces as a guide to locate holes. Test fit pieces.
> Paint fencing sections with a primer spray paint of desired color.
> Apply small dot of A/C super glue or tacky glue to bottom of each leg, and carefully place to holes.
> Adjust to desired height, and support in vertical position until A/C sets up.



Product Reviews
No Reviews For This Product.