This sheet of laser-cut Window Assemblies provides a mix of four different size windows - a nice selection for the scratch-builder or kit-basher.
Each window assembly includes laser-cut pieces for the window pane(s) (sashes), headers, trim, and sills. The modeler can use pieces to accommodate wood-framed windows or just the sashes for masonry wall windows. There is a mix of extra trim pieces to give the modeler a variety of pieces and parts. This item includes a sheet of acetate glazing that should be cut to size for each window.
To install the windows into the wall opening, first install the glazed sashes into the wall opening; be sure to leave a gap along the bottom edge of the sash to accommodate the sill. Add the sill below the lower window sash - perpendicular to the wall. Add header and side trim pieces around the perimeter of the wall opening - overlapping the edge of the window sash and the wall opening.
Window Sizes on this Sheet:
> Six (6) double hung 6-over-6 windows for a 3'-2" wide by 6'-3" high opening (top left corner of sheet).
> Twelve (12) single sash windows of various styles for a 2'-0" wide by 2'-6" high opening (top center of sheet).
> Four (4) double hung 4-over-4 windows for a 2'-2" wide by 5'-0" high opening (lower left corner of sheet).
> Three (3) large double hung 15-over-15 windows for a 8'-2" wide by 6'-4" high opening (lower right corner of sheet).
SIZES ON THIS SHEET
|
STYLE |
QTY |
SCALE SIZE
|
ACTUAL SIZE
|
WIDE |
HIGH |
WIDE |
HIGH |
Double Hung Windows |
6 |
3'-2" |
6'-3" |
0.4368" |
0.8621" |
Single Sash Windows |
12 |
2'-0" |
2'-6" |
0.2759" |
0.3218" |
Double Hung Windows |
4 |
2'-2" |
5'-0" |
0.2989" |
0.6897" |
Double Hung Windows |
3 |
8'-2" |
6'-4" |
1.1264" |
0.8736" |
"Actual Sizes" noted above are approximate - use the actual items to accurately mark wall openings. |
NOTE ON MATERIALS: This laser-cut sheet is available on either CARDSTOCK or RCBOARD. See the MATERIALS page for information on these options.